Dear Customer,
Thank you for purchasing this product. This document collect all the necessary information for the installation and use of this accessory
Need help ?
Write in the Forum on the www.RosettaCNC.com site or send an email to the following address: support@rosettacnc.com, the RosettaCNC development team will be happy to answer you in a short time.
All rights reserved on this manual. No part of this document can be copied or reproduced in any form without prior written authorisation. RosettaCNC Motion® does not insure or guarantee its contents and explicitly declines all liability related to the guarantee of its suitability for any purpose. The information in this document can be changed without notice. RosettaCNC Motion® shall not be held liable for any error or omission in this document. RosettaCNC Motion® is a registered trademark.
Document: | MIMROSETTACNCHANDWHEELA | |||
---|---|---|---|---|
Description: | Installation and Maintenance manual | |||
Link: | http://wiki.rosettacnc.com/doku.php/en/hardware/rosettacncboard/mimrosettacnchandwheela | |||
Document Release | Hardware Version | Description | Note | Date |
01 | 01 | / | 08/06/2017 | |
02 | 02 | / | 09/10/2018 | |
03 | 02 | Add description for RosettaCNC Board B | / | 12/12/2018 |
For the manual movements (jog) there is a RosettaCNC Handwell A accessory. It has an ergonomic shape that makes it easy to use And is contained in a sturdy anti-shock box. It is equipped with magnets that guarantee a reliable fixation, The electrical connection cable with the RosettaCNC controller It is equipped with a steel wire that increases its reliability and a removable connector with anti-vibration spring contacts.
Handwell A has :
Note:
Useful Information and tips.
Warnings, failure to comply with these warnings may result in inappropriate operation or damage to the device.^
Potential danger and possible risk of injury.^
With the product ordering code it's possible to obtain exactly the features.
Check that the product features match your needs.
The RosettaCNC HandWhell A product is available in the following version:
Model | Part number | Description |
---|---|---|
94030003 | RosettaCNC Handwhell A/CBL | Without connectors |
94030004 | RosettaCNC Handwhell A/WDA | With connectors ready to use for RosettaCNC Board A |
94030005 | RosettaCNC Handwhell A/WDB | With connectors ready to use for RosettaCNC Board B |
Name | Description |
---|---|
Emergency button | contact normally closed |
Enable button | enable Handwheel commands |
Switch | 3 positions, 1 - 1/10 - 1/100 |
Selector | 7 positions, OFF - X - Y - Z - 4 - 5 - 6 |
Encoder | 100 divisions for revolution |
Cable | with steel wire, length 1,7m (3m stretched) |
Support | with magnets |
Handwheel | Extension cord | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Handwheel | Operation | Cable | Connector | Colore | PIN | PIN | Colore | Connector | Cable | Color | |
+5V | 21 terminals, 8mt long shielded spiral cable | Weipu connectors WS28J20TS1 (male) | red | 10 | 10 | red | Weipu connectors WS28K20Zxx (femmina) | 21 terminals, 1.5mt long shielded cable | red | ||
0V | black | 11 | 11 | black | black | ||||||
A | green | 12 | 12 | green | green | ||||||
B | white | 13 | 13 | white | white | ||||||
A- | violet | 15 | 15 | violet | violet | ||||||
B- | violet/black | 16 | 16 | violet/black | violet/black | ||||||
X | yellow | 1 | 1 | yellow | yellow | ||||||
Y | yellow/black | 2 | 2 | yellow/black | yellow/black | ||||||
Z | brown | 3 | 3 | brown | brown | ||||||
4 | brown/black | 4 | 4 | brown/black | brown/black | ||||||
5 | pink | 19 | 19 | pink | pink | ||||||
6 | pink/black | 20 | 20 | pink/black | pink/black | ||||||
X1 | grey | 5 | 5 | grey | grey | ||||||
X10 | grey/black | 6 | 6 | grey/black | grey/black | ||||||
X100 | orange | 7 | 7 | orange | orange | ||||||
COM1 | orange/black | 14 | 14 | orange/black | orange/black | ||||||
COM2 | blue | 17 | 17 | blue | blue | ||||||
NC | blue/black | 18 | 18 | blue/black | blue/black | ||||||
LED+ | green/black | 9 | 9 | green/black | green/black | ||||||
LED- | white/black | 8 | 8 | white/black | white/black | ||||||
red/black 1) | red/black2) | red/black |
Encoder | |
---|---|
Color | Function |
red | +5V |
black | 0V |
green | A |
white | B |
violet | A- |
violet/black | B- |
Axis selector and multiplier | |
yellow | X |
yellow/black | Y |
brown | Z |
brown/black | 4 |
pink | 5 |
pink/black | 6 |
grey | X1 |
grey/black | X10 |
orange | X100 |
orange/black | COM1 |
Estop | |
blue | COM2 |
blue/black | NC |
LED | |
green/black | LED+ |
white/black | LED- |
This product is compliant only with RosettaCNC Board A hardware version 1.2 or greater.
Handwheel | Connector CN11 on RosettaCNC Board A | ||
---|---|---|---|
black | 1 | ||
white/black | |||
yellow | 2 | ||
yellow/black | 3 | ||
brown | 4 | ||
brown/black | 5 | ||
grey | 6 | ||
grey/black | 7 | ||
orange | 8 | ||
9 | |||
red | 10 | ||
orange/black | |||
green/black | |||
green | 11 | ||
white | 12 | ||
13 | |||
14 | |||
blue and blue/black | To be connected in series to the emergency stop circuit |
The following wires remain disconnected:
To connect the handwheel to the RosettaCNC board A, insert the connector into the CN11 as shown in the picture:
Picture 1. Handwheel Installation
Check the emergency button connection in accordance with the safety circuit of the machine.
For examples of connection of emergency circuits see the product manual RosettaCNC Board A.
Handwhell | Connector CN17 on RosettaCNC Board B | ||
---|---|---|---|
red | 1A |
Connect: |
|
green/black | |||
green | 2B | ||
white | 3B | ||
pink/black | 4A | ||
black | 7A | ||
white/black | 7B | ||
Connector CN19 on RosettaCNC Board B | |||
yellow | 2 | ||
yellow/black | 3 | ||
brown | 4 | ||
brown/black | 5 | ||
grey | 6 | ||
grey/black | 7 | ||
orange | 8 | ||
pink | 9 | ||
orange/black | To be connect at +24Vdc | ||
blue e blue/black | To be connected in series to the emergency stop circuit |
The following wires remain disconnected:
To connect the handwheel to the RosettaCNC board B, insert the connectors CN17 and CN19 as shown in the picture:
Check the emergency button connection in accordance with the safety circuit of the machine.
For examples of connection of emergency circuits see the product manual RosettaCNC Board B.
To use the handwheel, you must set the highlighted values in the followinf picture (In the “RosettaCNC board settings” Panel):
Below are links to consult the previous hardware versions of the product.
Modello | Part number |
---|---|
Hardware version 01 | User Manual |
All those who want to contribute to the improvement of this documentation are in advance thanks to the reporting inaccuracies or incorrect content. Write to the address: support@rosettacnc.com