AN002 - Schemi d'esempio per collegamento a driver AEC
Informazioni
Documento: | AN002 | |||
---|---|---|---|---|
Descrizione: | Schemi d'esempio per collegamento a driver AEC | |||
Link: | http://wiki.rosettacnc.com/doku.php/appnote:an002 | |||
Release documento | Release Hardware | Descrizione | Note | Data |
01 | 01 | Schemi d'esempio per il collegamento con driver stepper della AEC. | / | 05/06/2017 |
1. Descrizione
Il seguente manuale, illustra con alcuni schemi d'esempio, il collegamento tra RosettaCNC e 4 driver stepper della AEC.
Sono indicati anche i collegamenti con il volantino elettronico e l'encoder MPGA.
2. Power Section
3. Motor driver section
4. Y X axes controls motor driver section
5. Z A axes controls motor driver section
6. Alarms and alarm reset section
7. RossettaCNC input section
8. RossettaCNC input (with proximity homing) section
9. Handwheel section
10. Override section
11. RosettaCNC outputs section
12. Legend
Type | Code | Description | |
---|---|---|---|
AL | Logic Supply Input 220 Volt ac, Output 24 Volt dc, 2 Ampere |
||
AL2520 | Driver Power Supply | ||
Driver Axes | SMD1104LS | ||
SSR | Static relay 220 Volt ac 25 Ampere | ||
RosettaCNC | RosettaCNC Board A/4 | 97500003 | CNC Control |
Handwheel | 94030001 | ||
MPGA | 22100045 | Mechanical rotary encoder | |
R | 24 Volt coil relay, with gold contacts |